
For 333 years, Vasa lay beneath Stockholm’s harbor. Raising the warship in 1961 brought a remarkably preserved piece of the seventeenth century back into view. But getting the ship out of the water was never the end of the rescue.
Inside Stockholm’s Vasa Museum, the oak hull is slowly changing shape under its own weight. Its wood has weakened, its supporting cradle no longer distributes the load as it should, and the ship leans slightly to one side.
The response is Support Vasa, or Stötta Vasa: a roughly SEK 200 million effort to give the ship a new external support system and an internal steel skeleton. Construction began in April 2024, with completion planned for 2028, the 400th anniversary of Vasa’s first and only voyage.
A rescue that did not end in 1961
Vasa sank on August 10, 1628, after sailing only about 1,300 meters on its maiden voyage. A gust pushed the ship over, and water entered through its open gunports. The warship intended to demonstrate Swedish naval power disappeared within sight of the place where it had been built.
When it emerged from the harbor on April 24, 1961, it presented conservators with an extraordinary challenge: how to preserve a waterlogged wooden ship once it was exposed to air.
According to the museum’s historical timeline, the hull was sprayed with polyethylene glycol, a substance used to replace water in the wood and limit shrinking and cracking, from 1962 until 1979. Slow drying followed. Vasa’s survival has depended on continuing conservation ever since.
Why Vasa needs new support
The problem today is structural. Chemical degradation has reduced the strength of the centuries-old oak. Small movements accumulate, the hull deforms, and Vasa’s lean toward its port, or left, side has been increasing.
When the museum describes Vasa as sinking again, it is referring to this gradual downward and outward movement under the ship’s own weight. The ship remains on display inside the museum.
The replacement system must support the hull more evenly without causing further damage during installation. Workers are removing and replacing the old supports piece by piece, with positions calculated to the millimeter. Parts of the museum floor also need reinforcement to carry the loads at the new support points.
A steel skeleton inside a wooden ship
The construction plan replaces 17 pairs of external cradle elements with 27 specially designed steel cradles, spreading support across more points beneath the hull.
Inside, a steel framework will extend from the keel to the upper deck, helping carry the weight of decks and beams. The system is designed to slow movement, reduce the risk of cracks and allow adjustments, including a careful correction of the ship’s lean.
Swedish specialty steelmaker Alleima is supplying the steel for the internal structure. In a January 2026 project update, the museum explained that the material’s strength allows a lighter framework and fewer holes in the historic hull than would otherwise be needed.
Preserving Vasa for its next century
The museum describes the project as its greatest challenge since the ship’s salvage and conservation. The estimated SEK 200 million cost also requires funding beyond its everyday operations.
In May 2026, the Erling-Persson Foundation committed SEK 10 million. The museum said it remained in need of further funding, explaining that its own revenues, principally ticket sales, could not cover both normal operations and the new support structure.
For readers in the United States, the museum’s official donation page includes an Every.org option for U.S.-based supporters. Donations to the Vasa Rediviva foundation are dedicated to the support project, according to the museum.
Visitors can still see Vasa while the work proceeds: the museum plans to remain open throughout construction. The Vasa Museum is also featured in our guide to ten Swedish museums worth visiting. The approaching anniversary will mark four centuries since a disastrous voyage. It is also a deadline for the next stage of a rescue that has already lasted generations.
Featured image: Lovisa Brämming/The Vasa Museum/SMMTF, CC BY, via the Vasa Museum. Reporting is based on the museum’s project documentation and public updates.





